[Galaxy S III ] Siyah 1.6 +1.7 更新記錄

因為實在太冗長,   額外開一帖存放更新記錄

What is working:(當前可運作)

charge boost (for AC: up to 1200mA, for USB: up to 900mA)

充電加速 AC:最大1200mA  USB:最大900mA  需要自己調整,他不是預設值

Auto NTFS mounting to /mnt/ntfs after attaching an NTFS formatted USB stick

可支援ntfs格式,到要到/mnt/ntfs位置去找檔案

Audio enhancements, call it scoobydoo sound, eargasm or whatever

 (fully functional in v1.6b3)

音效強化, 個人目前也偏好eargasm,非常的讚,跟原廠比,

會有眼淚落下的感覺,當然你耳機要高檔

Overclocking (changes 1400 step to 1500 or 1600, available in v1.6a5)

CPU可超頻(當前最高1600mhz) .  現在已經可上1.7跟1.8ghz 了

Some tiny script based tweaks…

一些微小的腳本調教

Undervolting support, but works with nstools only.

Used Ezekeel’s customvoltage interface. 

it is very similar to netarchy’s UV_mV_table and you can use your existing scripts 

with some little modification.I have also added vdd_levels 

(don’t know who implemented this) 

and AndreiLux’s UV_uV_table interfaces

 but they are in /sys/class/misc/customvoltage. 

Lowest voltage level is 850mV until the sources are released. (available in v1.6a6)

支援CPU降壓，但目前只能用NSTOOLS來降才會正常運作 (v1.6beta13已解決)

最低的電壓只能降到850mV而已，除非三星那邊釋出原碼

Disabled some logs

禁用一些記錄

added lulzactiveq (not tweaked for s3 yet) and hotplug governors (v1.6a7)

除了hotplug以外 , 這次新增lulzactiveq這個governor  ,但尚未調教

removed the settings which are not available yet from STweaks (1.6a8)

移除掉STweaks中尚無作用的設定

mdnie sharpness tweaks from hardcore (1.6a9)

讓螢幕畫面有較少sharp和更多的readable.

added kernel version to version string to let you see 

which SiyahKernel version you have (v1.6beta10)

從關於手機那邊可以清楚可見核心的名稱與版本

based on LI8 stock kernel (v1.6beta10)

基於最新XXDLI8原廠核心去製作

4-step gpu clock settings (clock and thresholds), 

with 533MHz option and with some limitations

because of the lack of voltage settings (v1.6beta10)

GPU的調整目前有4-step，但還有一些限制當中，所以維持預設值就可以別亂動

mDNIe sharpness tweaks made optional, in STweaks/Screen tab (v1.6beta11)

STweaks裡面的Screen這一頁有mDNIe sharpness tweaks的選項給你，

預設是啟用，若你想要更多sharpness的螢幕畫面  你就取消然後重開機

SIO and V/R I/O Schedulers  (v1.6beta12)

I/O Schedulers  加回  SIO 與  V/R  模式

CIFS and NFS modules   (v1.6beta12)

CIFS and NFS  模組添加

GPU undervolting

 (lower limit:850mV, upper limit: 1075mV

 until the kernel is compiled from the sources)  (v1.6beta12)

GPU  降壓,  等未來資源完整才會開放更多下降

support for setcpu, voltagecontrol and similar apps 

which are using universal UV interfaces (v1.6beta13)

setcpu, voltagecontrol 跟其他相似的軟體都可以正式支援了

added 1.6GHz and 1.5GHz CPU freq steps. 

no longer modified 1.4step for overclocking. (v1.6beta13)

增加 1.6GHz and 1.5GHz CPU freq steps.

fixed gpu freq control and i/o schedulers (v1.6beta14)

修正GPU頻率控制 和   i/o  schedulers

fixed some modules not being loaded (v1.6beta14)

應該就是指上面那行說的, 有一些模組沒有正確被讀取

fixed vdd_levels path to fix STweaks

undervolting settings not being applied (v1.6beta15)

解決STweaks的降壓設定原本沒有應用成功

adjusted regulator limits (850mV -> 600mV) (v1.6beta15)

調整電壓下降的限制, 開放更大

configurable touchboost freq (v1.6beta15)

screen那邊新增 touchboost level 的調整

added gesture support (v1.6rc1)

這功能沒瞧見 (手勢支援?

enabled swap & zram (v1.6rc1)

Zram 已經在rc2 上 出現了 但我依舊不動他。

added gpu boost on touch (v1.6rc1)

就是MAIL TOUCH BOOST LEVEL 可以選擇第幾個STEP（我目前選STEP2

added mdnie toggle with home button (v1.6rc1)

就是按HOME鍵連續四下就會讓你手機整個變顏色(沒事別按XD)

5-step GPU, new frequency steps for GPU, gpu boost on touch and 

some other GPU related modifications/cleanup. 

removed zram settings from samsung’s init.rc and 

added it back to stweaks. (v1.6rc2)

所有GPU的五階段設定都回來了, 並且把Zram加回stweak的MISC設定裡面

mali as module (this version supports both Samsung JB and CM10 ROMs). 

開始完整支援Samsung JB and CM10 ROMs

removed swap & zram. fixed gpu clock setting problem. 

移除swap & zram , 修正GPU超頻設定上的問題

removed gpu boost temporarily. updated UMP driver. 

暫時移除 gpu boost , 更新 UMP 驅動

Added arm topology support again with cpupower driver. 

加入了CPU強化相關的驅動

better loadavg calculation (thanks to AndreiLux for his merges from upstream) (v1.6rc3).

更佳的loadavg calculation (也許跟讀取速度有關?

removed 900mV GPU voltage limit. 

移除  GPU 電壓上的限制

fixed GPU voltage settings not being applied on boot

修正 GPU電壓設定開機後沒有被應用的問題

. 

initramfs updates. fixed audio enhancements reset in some conditions. (v1.6)

資源更新, 修正音效強化相關的設定

v1.6.1: 

reverted mtp driver to fix mtp problems on osx. 

更新mtp驅動以修正osx上的mtp問題

removed some tweaks which were suspected to degrade performance.

移除一些會降低效能的調教

reniced kswapd0 to have lower priority. 

看朧謀

new wifi driver from n7105 sources.

新的 wifi 驅動

v1.6.2: 

cleaned ICS leftovers from ramfs. 

看朧謀

adjusted maximum GPU voltage constraint (1075mV->1400mV). 

調整GPU電壓極限成1400mV

increased default GPU voltages by 25mV. 

GPU電壓值全部都各增加25mV

This version will reset all your STweaks settings to defaults. 

這次版本將會自動重設STweaks回預設值

Enabled swap (still no zram).

依然沒有zram , 啟用回swap

v1.6.3: 

change packet filter settings to block multicast (thanks to Entropy512). 

fixed mali UMP mistakes which might be causing problems on Samsung ROMs. 

Reverted mali cpu lock levels to stock.

拍謝我看朧謀

v1.6.4: 

new CPU steps (1700MHz & 1800MHz) 

(thanks to AndreiLux as I used his kernel and multipliers while making the changes). 

stweaks可以超到1.7ghz , 若要超1.8ghz請用超頻軟體,

但1.8ghz幾乎人人當機,你確定要超嗎?

fixed mali module related problems.

修正 mali 模組相關問題

fixed lockup problem while charging the device when it is off. 

修正充電時候,螢幕沒鎖上的問題

reverted most of the changes back to v1.5 state which were removed 

during the lag-hunting process 

(discrete wakelocks, gestures, voltages…etc).

不太懂,算了不打

v1.6.5 

re-adjusted regulator constraints which were lost because of the removed module. 

因為移除一些模組所以有點問題,重新矯正了

fixed touch boost setting. 

修正 touch boost  設定

enabled swap.

啟用 swap

v1.6.6 

changed TMU thresholds a little. 

些微改變 TMU thresholds

fixed freq scaling stuck at some frequencies. 

修正有時候卡住的問題

removed cfs tweaks from stweaks.

移除 cfs tweaks

some experimental process priority modifications to 

have better UI experience. 

使用一些xda上的優化讓手機更順

most of the custom modules are now linked into the kernel 

and not loaded as modules. 

大多數的自訂的模組都能連結到核心了

lulzactiveq tweaks.

針對 lulzactiveq governor 調教

v1.6.6 i 

one line fix for freq being stuck at 1704MHz. 

changed process thresholds a little.

修正cpu 1.7ghz卡住問題 , 微調cpu thresholds 

v1.6.7: 

removed last remaining module and linked it into the kernel (mdnie_mods). 

Made all mdnie variables configurable via misc device 

(all in /sys/class/misc/mdnie). 

Hardcore’s sharpness tweaks are converted into a script 

to use the new interface as an example.

這次的好複雜, 不翻了

v1.6.8: 

fixed mdnie sharpness tweaks causing strange artifacts on boot animation.  

修正mdnie sharpness tweaks造成開機動畫上一些奇怪問題

removed process priority tweaks. 

移除某些調教

removed some unnecessary patches. 

移除一些不必要的破解

Enabled GENTLE_FAIR_SLEEPERS in default profile 

(either enable yourself if you are an existing user 

or reset stweaks if you want it to be enabled). 

預設啟用CPU選項第一個GENTLE_FAIR_SLEEPERS

You will see siyahkernel logo as I made this release 

while working on dual booting and did not spend any time to 

remove those, create “.nobootlogo” file in your internal sdcard 

if you find it too disturbing. 

這次開始加入我自己的開機logo,如果你不想要顯示,

就在內部sdcard空間新增一個檔案(不是資料夾喔)

檔名命名為.nobootlogo, 這樣就不會有我的開機logo了

Fixed setcpu showing 1704 when overclocked to 1700.

修正setcpu顯示1704mhz,正常是1700mhz

[Galaxy S III ] Siyah 1.7 更新記錄----

---

v1.7b1:

Dual-booting (supports only JB ROMs: Samsung JB and CM10)

雙重開機(僅支援 4.1.1三星ROM、CM10)

fixed a UMP related bug in v1.6.8 that was causing lags for CM10 users

修正一個 UMP相關的BUG解決CM10使用者發生LAG的問題

removed CPU locking when GPU freq >=440MHz

移除當GPU頻率大於等於440MHz的時候CPU鎖住

alternate touch recovery for secondrom related operations

提供一個觸控式的recovery供為第二個ROM的操作

Some 2ndROM features are missing. 

尚有一些第二個ROM的特色功能還沒完成

Implemented features are: 

Clone 1stROM to 2ndROM, Clone 2ndROM to 1stROM, Swap ROMs, Delete 2ndROM.

已完成的部份是上面這幾項功能。

Clone 1stROM to 2ndROM,  複製第一個到第二個ROM

Clone 2ndROM to 1stROM,  複製第二個到第一個ROM

Swap ROMs,   似乎是 交換ROM的位置

Delete 2ndROM.  刪除第二個rom

v1.7b2: 

new recovery features: 

installing zips to secondrom, wipe 2ndROM data/cache & dalvik 

繼續新增上面這幾項功能。

fix 2ndROM permissions (EDIT: will be available in the next version),  

這項功能要v1.7b3才可以使用！

exfat support. 

recovery已經可以掛載exFAT格式的外部記憶卡

Fixed system partition cannot be mounted read/write. 

修正系統區不能掛載成讀/寫

The recovery will be flashed together with the kernel.

未來一版核心會與recovery結合

v1.7b3: 

Recovery is merged with the kernel, no more separate recovery. 

Recovery已經與核心結合了，不再額外提供Recovery

Flash back your favorite recovery and use STweaks to boot into 2ndROM-utils 

(which is another CWM-based recovery built into the kernel). 

隨時都可以刷回你喜歡的recovery，若想要進入2ndROM-utils請使用STweaks

Added “no boot logo” option to STweaks. 

新增一個禁止秀出開機logo的選項，讓你決定秀還是不秀

Added “Reboot into 2ndROM Utils”, “Reboot into First ROM” and “Reboot into Second ROM” options. 

新增三個選項，分別是重開到2ndROM Utils、重開到第一個ROM、重開到第二個ROM

Added “Fix 2ndROM permissions” and “Wipe 2ndROM cache”

 (wipes only cache partition, not data) to 2ndROM-utils. 

新增Fix 2ndROM permissions與Wipe 2ndROM cache兩個功能到2ndROM-utils

Fixed some bugs in 2ndROM-utils. 

修正一些問題(2ndROM-utils)

Added “Black Crush Fix” by AndreiLux. 

新增Black Crush Fix（由Perseus核心作者提供）

lcd freq is decreased just a bit to save a little power.

減少一些lcd頻率希望可以稍微省一點電



v1.7.b4: 
replace the recovery image with the new one 
which was forgotten in the previous release. 
上一版忘記放入比較新的recovery

fix permissions on 2ndROM should be working now. 
2ndROM 的 fix permissions 應該正常運作了

Made a change in wifi offload filtering to deny muticast packets but allow multicast DNS packets.
wifi會進行過濾，允許 DNS封包


v1.7.b5:
added (again) gpu boost on touch.
再一次把Gpu boost 用回STweaks 選項
set touch boos default back to 800MHz.
把 touch boost  預設值回 800 MHZ
updated bcmdhd driver to the one in korean s3 driver. 
使用 韓版S3 的 bcmdhd driver 
mali refactorings (new_* interfaces removed from /sys/module/mali/parameters. 
this will fix malistatus problem).
修正 malistatus  問題


修正記錄,  就更新到 b5 ,  
我不能再幫忙(沒時間) , 各位自己玩吧